SB003 - Key programming by RH850 dump and ESL reset/ synchronization

ABRITES software license for working with Subaru vehicles: replace faulty ESL by resetting and syncing second-hand ESL, or syncing a new ESL with Smart system and program keys.

The SB003 license allows you to work with Subaru vehicles with faulty ESL modules for key programming in all-key-lost situations. Using it, you can get the info from the Smart system, replace the ESL with a new or used one, and program a smart key to the vehicle.

Functionalities:

• Smart system data flash reading and programming new keys to the vehicle.
• Reset and synchronize the second-hand ESL module with the Smart system.
• Synchronize the new virgin ESL with the Smart system.

First, take the Smart system out of the vehicle and read its data flash on the bench using the ZN085 ABRITES RH850/V850 Programmer. Then, use the read dump to prepare the Smart system's emulator TA68 (DST-AES). With the TA68 emulator, you can perform synchronisation between the Smart system and the new virgin ESL. You can also use a second-hand ESL module and sync it with the Smart system. After syncing, you can learn new keys with the help of the ZN003 PROTAG Programmer.

Supported vehicles:

All keyless Subaru vehicles 2020+

Required hardware:

• ZN085 ABRITES RH850/V850 Programmer and the CB501 cable included in its set (for reading Data flash on the bench).
• TA68 DTS-AES transponder emulator (for ESL and Smart system sync).
• ZN003 Protag V2 key and transponder programmer (to program new keys).
• AVDI with active AMS is a must.