AVDI SET307 – Direct CAN-BUS connection set for BMW Bikes

The SET307 contains a designated cable and antenna for key programming procedures (in all key lost situations and spare key addition) on BMW motorcycles, with a smart key on the bench or on the vehicle when needed.

Functionality:

• Key programming on the vehicle (All Keys Lost and spare key addition)
• Key programming on the bench (All Keys Lost and spare key addition)
• Change ISN in the EWS module on bench

Contents:

• CB307 Direct CAN-BUS Connection Cable for BMW Bikes
• ANT001 Key Transponder Antenna for BMW Bikes

Supported vehicles:

• BMW motorcycles with smart key

How it works:

• When working with the motorcycle, connect the CB307 between the EWS and the rest of the installation (refer to the manual for this purpose). Then, follow the software's instructions to complete the procedure.
• When working on the bench, use the whole set: both the CB307 cable and the ANT001 antenna are required for guaranteed success. Connect the CB307 to the EWS module (via the designated connector) and to AVDI (via the DB25 connector), then to a 12V power supply adapter. Connect the CB307 cable to the antenna ANT001, as well. To complete the procedure on the bench, the software will request that you place the new key on it to program it.

ABRITES Vehicle Diagnostic Interface (AVDI) with active Annual Maintenance Subscription (AMS), and the BN017 license Key programming, VIN, and immobilizer (EWS/HUF/X_SLZ ) adaptation for BMW Bikes is required to use the full functionality of this product.