PN017 AVDI BSI, Instrument Cluster Data Manager for Peugeot, Citroen

The PN017 replaces the PN015 and is dedicated to the Instrument cluster and BSI odometer data calibration in Peugeot/ Citroën. With this special function you can read and calibrate the mileage stored in the BSI module and remove the synchronization with the instrument cluster (i.e. The modification is performed in the BSI exclusively and after a complete ignition cycle the mileage is not restored to the original value). In the cases where the sync removal does not apply it can calibrate the mileage in the cluster exclusively. Supported models are all CAN and UDS protocol models which include almost all models produced after 2004. Support for Delphi UDS BSI 2016+ included.

Supported Vehicles for Calibration: 

• BSI Exchange - allows you to read the whole content of one BSI (JCI or Valeo CAN) and transfer it to another one. It is very important to use the same hardware type for the replacement BSI. The Valeo BSIs are two types – the old one is thick, while the new one is thin, so they can’t be mistaken (to use this special function you need to have PN017 + PN018 special functions). The UDS BSI modules are supported via read/write EEPROM and flash.

N.B. Please note that you will require an AVDI interface with an active AMS in order to use this special function. Absolutely no tokens required.