Discover how to use the Xhorse Condor Mini to cut HU162T key blanks for new VAG locks

Update your Xhorse Condor Mini to version V5.03 and follow our step-by-step guide to cut keys for new VAG locks:

• Step 1 Select "Cut By Bitting" on the Main Menu and then enter the key reference HU162T-9 or HU162T-10 depending on the cuts of the key you have to cut. For the purpose of this guide, we will be using a 9-cut key blank.

• Step 2 Tap “Key Decode”, select the key type and then tap (1) "Key Decode" to decode your customer’s key as shown in the below. (2) Alternatively, if you already know the height of the 9 bittings, simply enter them. Follow the on-screen instructions to cut the key.

• Step 3 After you have successfully cut the horizontal cuts, go back to “Select Key Type” and proceed to decode the three vertical cuts remaining or enter the height of the bittings if you know them. Switch to position D of the M2 Jaw and use a key blank to hold the key you are cutting in position as shown in the images below. Follow the on-screen instructions to cut the key.

Click here to see the Xhorse Condor Mini in action