ICS Decoder For IClass SE & SEOS

Description

ICS DECODER FOR ICLASS SE & SEOS

• The ICS Decoder is an accessory for the ICopy-XS (sold separately) which can clone iCLASS SE & SEOS. The ICS Decoder is an accessory for the iCopy-XS and only works in combination with it.
• Most iCLASS SE & SEOS systems still have legacy card acceptance enabled in their configuration. The ICS Decoder can decode iCLASS SEOS IP / SE cards, and then generate a new card with legacy encoding.
• The ICS Decoder will only work for target systems that are configured to accept legacy cards.

The ICS Decoder is a simple plug-and-play device. Setup is quick and easy:

• Plug the ICS Decoder into the iCopy-X using the provided USB-C cable.
• The iCopy-X will recognise the accessory within 5 seconds.
• If the device is not recognised, simply unplug and replug the device.
• Place the target iCLASS SE® / iCLASS SEOS card® on the ICS Decoder.
• The target card's CSN, Facility Code, and Card Number will be displayed.
• Disconnect the ICS Decoder.
• The iCopy-X will prompt for an ICS blank card.
• Place the blank card on the device to write the card.

What's included:

• - 1x ICS Decoder
• - 3x iCLASS SE / SEOS Blank Cards (One-Time-Write)
• - 1x USB Type-C to USB Type-C Cable